Rammed earth
comparative analysis of particle size distribution and compressive strength with chemical additives
DOI:
https://doi.org/10.47236/2594-7036.2026.v10.2122Keywords:
Vernacular architecture, Earthen construction, Unconfined compressive strength, Soil-cement, Rammed earthAbstract
The objective of this study was to: (i) comparatively analyze soil particle-size distribution obtained through laboratory sieving and field sedimentation tests, verifying the accuracy and reliability of the empirical method; and (ii) investigate the influence of different chemical additives on the axial compressive strength of compacted soil. For the particle-size analysis, procedures established by ABNT NBR 7181 (2025) were adopted, using ABNT NBR 6502 (2022) and the Unified Soil Classification System (USCS) as references for classification and particle-size limits. To evaluate axial compressive strength, the procedures described in ABNT NBR 12024 (2012) and ABNT NBR 17014 (2022) were employed. The results demonstrated the reliability of the sedimentation test for determining soil particle-size distribution. In the axial compressive strength tests, specimens with the addition of 8% cement showed the best performance, achieving an estimated characteristic strength of 5.2 MPa. It is concluded that the empirical sedimentation test constitutes a technically viable alternative for particle-size characterization in resource-limited contexts and that soil stabilization with 8% cement provides adequate mechanical performance for rammed earth construction, contributing to the expanded application of this sustainable construction technique.Downloads
References
ALMEIDA, T. S.; FEITOSA, A. O.; SOBRINHO JÚNIOR, A. S.; NOGUEIRA, J. C. A.; SILVA, V. R. da. Construções com solo-cal: considerações sobre transferência de tecnologia a uma comunidade na cidade de João Pessoa. Inter Scientia, v. 4, n. 2, 2016.
ARRIGONI, A.; BECKETT, C.; CIANCIO, D.; DOTELLI, G. Life cycle analysis of environmental impact vs. durability of stabilised rammed earth. Construction and Building Materials, [S. l.], v. 142, p. 128-136, 1 jul. 2017.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR NM ISSO 376: Materiais metálicos - Calibração de instrumentos de medição de força utilizados para a verificação de máquinas de ensaios uniaxiais. Rio de Janeiro: ABNT, 2021.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR NM ISO 7500-1: Materiais metálicos — Calibração e verificação de máquinas de ensaio estático uniaxial — Parte 1: Máquinas de ensaio de tração/compressão — Calibração e verificação do sistema de medição de força. Rio de Janeiro: ABNT, 2023.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 12024: solo: cimento: moldagem e cura de corpos de prova cilíndricos: procedimento. Rio de Janeiro: ABNT, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 16868-3: alvenaria estrutural: parte 3: métodos de ensaio. Rio de Janeiro: ABNT, 2020.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 6502: rochas e solos. Rio de Janeiro: ABNT, 2022.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 17014: taipa de pilão: requisitos, procedimentos e controle. Rio de Janeiro: ABNT, 2022.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 7181: solo: análise granulométrica. Rio de Janeiro: ABNT, 2025.
BARROS, V. S. N.; MARSON, N. A. M. Implantação da taipa de pilão como sistema de construção alternativa, quanto ao seu impacto ambiental. Research, Society and Development, v. 11, n. 13, e536111335782, 2022. (CC BY 4.0). ISSN 2525-3409.
BESSA, S. A. L.; GALÉRY, R.; LAGE, G. T. L.; MATIAS, L. M.; SANTOS, B. F. A. Potencial de estabilização da taipa de pilão com rejeitos de mineração e cal. In: ENCONTRO NACIONAL DE APROVEITAMENTO DE RESÍDUOS NA CONSTRUÇÃO, 8., p. 1-6, Foz do Iguaçu. Anais [...]. Foz do Iguaçu: Unila, 2023.
BESSA, S. A. L.; LAGE, G. T. L.; SANTOS, B. F. A. Estabilização da taipa de pilão com cal: análise da literatura. In: ENCONTRO DE SUSTENTABILIDADE EM PROJETO (ENSUS), 12., 7-9 ago. 2024, Belo Horizonte. Anais [...]. Belo Horizonte: UFMG; UFSC, 2024.
BESSA, S. A. L.; MENDES, L. C. F. Análise da evolução tecnológica da taipa de pilão contemporânea. MIX Sustentável, Florianópolis, v. 8, n. 1, p. 66-77, jan. 2022. DOI: 10.29183/2447-3073.MIX2022.v8.n1.66-77.
CALDAS, L. R.; MARTINS, A. P. S.; TOLEDO FILHO, R. D. Construção com terra no Brasil: avaliação ambiental da taipa de pilão. PARC: Pesquisa em Arquitetura e Construção, Campinas, v. 12, 2021.
CASTILHO, B. C.; LUIZ, A. M. F.; TAMURA, S. H. L. P. S. Perfil ambiental de edificações com os sistemas construtivos em alvenaria estrutural e em taipa de pilão. ENCONTRO DE SUSTENTABILIDADE EM PROJETO (ENSUS), 12., 2024, Florianópolis. Anais [...]. Florianópolis: Universidade Federal de Santa Catarina, 2024.
CASTRO, M. L. A. C.; REZENDE, M. A. P.; ROCHA, G. F.; LAGE, G. T. L. Taipa de pilão: uma jornada evolutiva na história da construção do Brasil. Caderno Pedagógico, [S. l.], v. 20, n. 5, p. 1156-1178, 2023. DOI: 10.54033/cadpedv20n5-008.
CUNHA JUNIOR, H. Tecnologia africana na formação brasileira. Rio de Janeiro: Ceap, 2010.
DUTRA, P. R.; GUZZO, E.; SOARES, G. F. P. Estudo sobre a viabilidade da utilização de areia industrial em substituição à areia natural para a confecção de argamassas para alvenaria estrutural cerâmica. In: ENCONTRO NACIONAL DE APROVEITAMENTO DE RESÍDUOS NA CONSTRUÇÃO, 6., n. 1, p. 228-238, 2019, Belém. Anais [...]. Belém: UFPA, 2019.
EIJK, D. van; SOUZA, V. C. M. Surgimento, desenvolvimento e desaparecimento da técnica taipa de pilão no Brasil. Conservar Património, n. 3-4, p. 17-24, dez. 2006.
FERREIRA, M. C. L. Ensaio de viabilidade construtiva de muro pelo processo associado da taipa de pilão com solo-cimento. Trabalho de conclusão de curso – Instituto Federal de Minas Gerais, 2018.
FOX, R. W.; PRITCHARD, P. J.; McDONALD, A. T. Introdução à mecânica dos fluidos. 8. ed. Rio de Janeiro: LTC, 2014.
INSTITUTO BRASILEIRO DE GEOGRAFIA E ESTATÍSTICA (IBGE). Manual técnico de pedologia. 2. ed. Rio de Janeiro: IBGE, 2007. (Manuais Técnicos em Geociências, n. 4).
LIMA, P. O uso da taipa de pilão na arquitetura contemporânea como bioconstrução. 2018. 198 f. Tese (Doutorado em Arquitetura e Urbanismo) – Universidade Paulista, São Paulo, 2018.
MENDES, L. C. F.; BESSA, S. A. L. Análise da evolução tecnológica da taipa de pilão contemporânea. MIX Sustentável, v. 8, n. 1, p. 66-77, 2022.
MILANI, A. P. S.; MAIA, M. M. Uso de aditivos químicos para redução de energia de compactação na execução de taipa de pilão. In: CONGRESSO DE ARQUITETURA E CONSTRUÇÃO COM TERRA NO BRASIL: território e trabalho – a produção da arquitetura com terra no Brasil, 7., 2018, p. 68-74, Rio de Janeiro. Anais [...]. Rio de Janeiro: TerraBrasil, 2018.
PETCU, C.; DOBRESCU, C. F.; DRAGOMIR, C. S.; CIOBANU, A. A.; LĂZĂRESCU, A. V.; HEGYI, A. Thermophysical Characteristics of Clay for Efficient Rammed Earth Wall Construction. Materials (Basel), v. 16, n. 17:6015, 1 set. 2023. DOI: 10.3390/ma16176015.
PISANI, M. A. J. Taipas: a arquitetura de terra. Sinergia, São Paulo, v. 5, n. 1, p. 9-15, jan./jun. 2004.
Plano Diretor de Desenvolvimento Integrado – PDDI-RMBH. Bases cartográficas. 2017. [s. n.], [n. d.].
REZENDE, M.; A. P. REIS LOPES, W. G. Arquitetura e construção vernácula com terra no Brasil. In: NEVES, C. et al. Arquitetura e construção com terra no Brasil. Tupã: ANAP, 2022. p. 27-35.
SANTOS, H. G. et al. Sistema brasileiro de classificação de solos. 5. ed. Brasília, DF: Embrapa, 2018.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Fernanda Fonseca de Melo Coelho, Leandro Alves Evangelista, Vinícius Dutra Tomaz

This work is licensed under a Creative Commons Attribution 4.0 International License.
It allows sharing, adaptation, and use for any purpose, including commercial use, provided proper attribution is given to the authors and to Revista Sítio Novo.
The authors declare that the work is original and has not been previously published, in whole or in part, except on recognized preprint servers, if declared, and that no other similar manuscript authored by them is published or under review by another journal, whether printed or electronic.
They declare that they have not violated or infringed upon any proprietary rights of others, and that all citations in the text are factual or based on research with scientifically significant accuracy.
The authors retain the copyright of the manuscripts published in this journal, allowing unrestricted use of their content, provided that the original authorship and the publication source are properly cited.















