The relevance of product tests in the construction of educational artifacts in professional master and doctorate degrees in Brazil
DOI:
https://doi.org/10.47236/2594-7036.2023.v7.i4.28-38pPalabras clave:
Educational Product. Effectiveness Assesment. Quality Assesment. Technological Product. Types of Product Tests.Resumen
Although they are mandatory requirements for obtaining a master's or doctor's degree in stricto sensu postgraduate courses of a professional nature, educational products are still an area to be explored in terms of their literature at the national level. This study highlights the relevance of performance tests for evaluating educational artifacts. The conceptual bibliographic method was used, which consists of four stages. These phases are a) definition of research questions, b) data collection on scientific bases, c) organization and analysis of data, and d) generation of answers to the research's guiding questions. The execution of these procedures allowed the construction of the study's theoretical framework, which brings the conceptual scope of the terms "educational product" and "product tests." In addition, this textual production lists and describes the types of existing tests to measure the quality and effectiveness of educational products. The types of tests presented are related to: a) effectiveness, b) efficiency, c) usability, d) market, f) compliance, and g) reliability. The study concludes that for a prototype (initial version of an educational artifact) to be considered a product, it must pass all these tests before having its final version released to its target audience.Descargas
Métricas
Citas
ALBUQUERQUE, A. S. F. et al. Processo de institucionalização: um estudo sobre a experiência do espaço da cidadania ambiental (ECAM). Review of Research, v.7, n.9. p.1-13, 2018.
ANDELKOVIĆ, A.; RADOSAVLJEVIĆ, D.; ARSENIJEVIĆ, O. Entrepreneurial education as a critical factor of success in the future of the Republic of Serbia. In: 37th INTERNATIONAL CONFERENCE ON ORGANIZATIONAL SCIENCE DEVELOPMENT: ORGANIZATION AND UNCERTAINTY IN THE DIGITAL AGE. Proceedings... Portorož, Slovenia, 21 – 23 march. 2018.
ARAÚJO, A.S.O.; RODRIGUES, C.K.; LOZANO, A.R.G. Produto educacional – vídeo aula: sólidos geométricos: poliedros e corpos redondos. In: II ENCONTRO DE PESQUISA EM ENSINO DE CIÊNCIAS E MATEMÁTICA. Anais... [s.l.], 2014.
BISWAS, S.; UDAI, A.D.; KUMAR, G. A hardware-in-a-loop setup for benchmarking robot controllers. In: SAHANA, S.; BHATTACHARJEE, V. (Eds.). Advances in computational intelligence. Advances in intelligent systems and computing. Singapore: Springer, 2020.
BREI, V. A.; VIEIRA, V. A.; MATOS, C. A. Meta-análise em Marketing. Revista Brasileira de Marketing. v. 13, n.2, p. 84-97, 2014. https://doi.org/10.5585/remark.v13i2.2681.
BRITO, Z. M. et al. Processo Gerencial: uma análise para suporte à gestão em uma instituição federal de ensino. In: XVI COLÓQUIO INTERNACIONAL DE GESTIÓN UNIVERSITARIA – CIGU. Anais... Arequipa, 23, 24 e 25 de novembro de 2016.
CAPES. Comissão de Aperfeiçoamento de Pessoal de Nível Superior. Documento de área 2013. Brasília: CAPES, 2013.
CHANG, B. Reflection in learning. Online learning, v. 23, n. 1, p. 95-110, 2019. https://doi.org/10.24059/olj.v23i1.1447.
DELGADO, H.B. El impacto de la calidad educativa. Apunt. Cienc. Soc., v.4, n.1, p.112-117. 2014.
EGUPOVA, M.V. Training in the creation of educational products during the methodical preparation of students for the implementation of the line of practical applications of school mathematics. Teacher Education and Science, v. 3, 37-41, 2012.
LIN, X. et al. Designing technology to support reflection. Educational Technology Research and Development, v. 47, n.3, 43-62, 1999. https://doi.org/10.1007/BF02299633.
FALLAHUDIN, A.; ADMAJA, A.T.; IWANDANA, D.T. Level of physical fitness taekwondo UKM students. Quality in Sport, v.1, n.6, p.7-12, 2020. http://dx.doi.org/10.12775/QS.2020.001.
GONÇALVES, C.E.L.C. et al. Alguns) desafios para os produtos educacionais nos mestrados profissionais nas áreas de Ensino e Educação. Revista de Estudos e Pesquisas sobre Ensino Tecnológico, v. 5. n. 10, p.74-87, mar. 2019. https://doi.org/10.31417/educitec.v5i10.500
HAMMAD, M. et al. Multiview visualization of software testing results. International Journal of Computing and Digital Systems, v.9, n.1, p.51-59, 2020. http://dx.doi.org/10.12785/ijcds/090105
LUBWAMA, R. Optional technical skills. In: The inside track to excelling as a business analyst. Apress: Berkeley, 2020. https://doi.org/10.1007/978-1-4842-5543-8_4
LUKOSEVICIUS, A. P. Executar é preciso, planejar não é preciso: proposta de framework para projetos de pesquisa. Administração: Ensino e Pesquisa, v.19, n.1, p.32-65, jan./abr. 2018. https://doi.org/10.13058/raep.2018.v19n1.765.
NASCIMENTO-E-SILVA, D. Manual do método científico-tecnológico: versão sintética. Florianópolis: DNS Editor, 2020.
NASCIMENTO-E-SILVA, D. Gestão de organizações de ciência e tecnologia: ferramentas e procedimentos básicos. Saarbrücken: Novas Edições Acadêmicas, 2017.
NASCIMENTO-E-SILVA, D. Manual de redação para trabalhos acadêmicos: position paper, ensaios teóricos, artigos científicos, questões discursivas. São Paulo: Atlas, 2012.
NASCIMENTO-E-SILVA, D. et al. Proposição de uma sistemática de avaliação de aprendizagem na formação de administradores com base no processo gerencial. Rev. Adm. Universidade Federal de Santa Maria, v. 6, n. 4, p. 640-657, dez. 2013. https://doi.org/10.5902/198346595826.
NIEVEEN, N. Design Approaches and Tools in Education and Training. Springer Science Business Media, B.V, 2009. https://doi.org/10.1007/978-94-011=4255=7.
PARASCHIVESCU, A.O.; COTÎRLET, P.C. Quality continuous improvement strategies kaizen strategy – comparative analysis. Economic Transdisciplinary Cognition, v. 8, n. 1, p. 12-21, 2015.
PINO, A. S. Educação a distância: propostas pedagógicas e tendências dos cursos de graduação. Dissertação (Mestrado em Ciências). Universidade Nove de Julho, São Paulo, 2017.
PATEL, M.K. Quality improvement in higher education though skilled based programs for New India. Research Review International Journal of Multidisciplinary, v. 4, n. 4, p. 1852-1885, 2019.
PLOM, T.J. Education Design; Introduction from Tjeerd Plom (eds). Educational & Training System Design: Introduction. Design of Educational and Training (in Dutch). Utrecht (the Netherlands): the University of Twente., 2010.
RACAT, M.; CAPELLI, S. The future of consumption in a Halptic-Based world. In: Haptic sensation and consumer behavior. Palgrave Pivot: Cham, 2020.
ROGERS, Y.; SHARP, H.; PREECE, J. Design de interação: além da interação humano-computador. 3. ed. Bookman: Porto Alegre, 2013.
SANTANA, E.M. F. Deficiências e incapacidades por hanseníase na
atenção secundária à saúde. Dissertação (Mestrado em Enfermagem). Universidade Federal da Paraíba, João Pessoa, 2017.
SILVA. R.O. et al. Aspectos relevantes na construção de produtos educacionais no contexto da educação profissional e tecnológica. REPPE – Revista de Produtos Educacionais e Pesquisas em Ensino, v. 3, n. 2, p. 105-119, 2019.
SLACK, N.; CHAMBERS.; JOHNSTON, R. Administração da produção. 3. ed.
São Paulo: Saraiva, 2009.
SOUSA, M.C. Quando professores que ensinam Matemática elaboram produtos educacionais, coletivamente, no âmbito do Mestrado Profissional. Bolema, v.27, n.47, p.875-899, 2013.
TONNETO, J. A.; ROMANO, A. L.; MARÇOLA, J. A. O planejamento avançado da produção nas atividades de engenharia do produto: apresentação de uma pesquisa-ação brasileira. FACEF Pesquisa: Desenvolvimento e Gestão, v. 21, n. 1, p. 61- 72, 2018.
ZANCANARO, A. Produção de recursos educacionais abertos com foco na
disseminação do conhecimento: uma proposta de framework. Tese (Doutorado em Engenharia e Gestão do Conhecimento). Universidade Federal de Santa Catarina, Florianópolis, 2015.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2024 Ronison Oliveira da Silva, Júlia Angélica de Oliveira Ataíde, Jose Anglada Rivera, Daniel Nascimento-e-Silva

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Permite el intercambio, la adaptación y el uso para cualquier fin, incluso comercial, siempre que se otorgue la debida atribución a los autores y a la Revista Sítio Novo.
Los autores declaran que el trabajo es original y que no ha sido publicado previamente, ni total ni parcialmente, salvo en servidores de preprints reconocidos, siempre que se declare, y que ningún otro manuscrito similar de su autoría se encuentra publicado ni en proceso de evaluación por otra revista, ya sea impresa o electrónica.
Declaran que no han violado ni infringido ningún tipo de derecho de propiedad de terceros, y que todas las citas en el texto son hechos verídicos o están basadas en investigaciones con exactitud científicamente comprobable.
Los autores conservan los derechos de autor de los manuscritos publicados en esta revista, permitiendo el uso irrestricto de su contenido, siempre que se cite adecuadamente la autoría original y la fuente de publicación.













